Internet explorer not supported - Please switch to Edge, Firefox, Chrome, Opera or other browser and improve the safety of your navigation

Navigation Menu

Messer - Air separation unit - CryoGan - Strategic application technology

---CRYOGAN

CRYOGAN

CRYOGAN NITROGEN GENERATORS – A PARTICULARLY COST-EFFECTIVE SOLUTION

CryoGAN top 2606

CRYOGAN

In order to meet the demand for larger quantities of nitrogen at optimal costs, and the more severe requirement for CO2 footprint reduction, Messer has developed its CryoGAN nitrogen generator concept. CryoGAN is a special nitrogen production unit that operates on the principle of cryogenic air separation, but tailor made for the customer requirements in each single case.

Messer develops and builds the CryoGAN generators in-house. The units are modular in design and offer a graduated capacity range from 300 Nm3/h to 15 000 Nm3/h. The layout is based on the Messer safety and reliability philosophy which has been applied for over 20 years in operating air separation plants for the supply of customers world-wide.

The nitrogen generator has been designed for the ease of operation and low maintenance. In order to minimize personnel and operating costs, all equipment and process controls will be operated and monitored by a computer control system, therefore all the plants are remote controlled.

Major feature of CryoGAN nitrogen generator:

 

Nested Applications

Major feature of CryoGAN nitrogen generator ( 1 column)

  • Capacity: 300 to ⩾15,000 Nm3/h nitrogen
  • Purity: 99.999 to 99.9999 (2.0 to 0.2 ppm O2)
  • Supply pressure: 4 -10 bar (g)
  • Operating range: 100-50%
  • Specific energy: 0.22-0.35 kWh/Nm3
  • Availability >99.9%

Major feature of CryoGAN 250624

  • Reduction of CO2 emissions
  • Configured for CAPEX and/or OPEX
  • Designed for 24x7 operation
  • Safe, reliable, simple to operate, easy to maintain
  • Plug-and-play installation
  • Short construction time 

 

Reliable backup supply GAN

Reliable Backup Supply

A reliable supply from a backup source – just in case it is ever needed – is the icing on the cake of any on-site concept, allowing the customer to sleep soundly in terms of gas supplies, even when there are maintenance downtimes, power outages or other unforeseen events. Our regional logistics network with centrally managed European coordination, combined with sophisticated production planning, ensures that every customer receives a reliable supply of technical gases from Messer, even during planned and unplanned downtimes.

Optional co-products for nitrogen generator:

  • Compressed dry air
  • Residual air with high oxygen content

APPLICATIONS of CryoGAN

APPLICATIONS

The nitrogen produced by the CryoGAN nitrogen generator is ideal for the chemicaloil and gasautomotiveagricultural and food industrieselectronics and other industries including production of lithium-ion batteries.

Based on the requirements, wishes of the client and the agreed conditions, the CryoGAN nitrogen generator with a backup system will be installed on the customer´s premises. The system allows to guarantee the continuous supply of the customer's production with gas in terms of required volume and pressure

 

Teaser CryoGAN

Diagram of a CryoGAN nitrogen generator

Diagram of a CryoGAN nitrogen generator

Powerful as a matter of principle Irrespective of their capacity, the basic principle is the same for all CryoGAN nitrogen generators and consists of the following components

VPSA ( just for draft) Air Compression and Purification Process air is cleaned from dust and other particles in an air filter and then compressed to the required process pressure by an air compressor. The compressed air is cooled in an air cooled refrigeration unit. Air purification: The process air passes through one of the vessels where water, carbon dioxide and most of the hydrocarbons are removed from the air system. Main Heat Exchanger The compressed, purified air passes directly to the main heat exchanger within the cold box where it is cooled close to saturation against the gaseous product and waste stream which are leaving the main heat exchanger. In counter-current flow to the incoming air, the cold separated products from the plant are warmed back to ambient temperature. Rectification: In the rectification column the air is separated into pure nitrogen at the top, and into an oxygen enriched liquid at the bottom. The required reflux for rectification is provided by condensing a portion of the gaseous nitrogen in heat exchange against boiling oxygen rich liquid in the condenser. Cold source: Liquid nitrogen from the LIN-assist tank is used to provide the required refrigeration. Back up: The presence of a backup system allows our client to continue working during preventive maintenance, equipment maintenance and possible force majeure situations. During such periods, the Customer will be supplied with Nitrogen through a back-up system. Our regional logistics network with centrally managed Europe-wide coordination, combined with sophisticated production planning, ensures that every single customer receives a reliable supply of technical gases from Messer, even during planned and unplanned downtimes

Contact form for every page

Contact us

select action

Form

Action Form - Integration with Hubspot

There has been an error processing your registration. Please double-check the information entered.
By clicking I accept the GDPR policy of the Messer Group. This agreement can be revoked at any time